LinkedIn banner size is 1584 x 396 pixels (a 4:1 ratio) for a personal profile and 1512 x 256 pixels for a Company Page cover, according to LinkedIn's own help pages checked in November 2026. If you are building a presence as part of wider digital marketing in South Africa, the banner is the first wide visual a prospect sees, and the two sizes are not interchangeable.

Some guides still quote 1128 x 191 for a Page cover and others 4200 x 700. This post lists the figure LinkedIn's own help pages give for every banner-type image, shows which Page number is official, and works through the crop arithmetic for reusing one design on both a profile and a Page.

Quick Answer

The LinkedIn banner size for a personal profile is 1584 x 396 pixels, JPG or PNG, under 8MB. A Company Page cover is 1512 x 256 pixels, PNG or JPEG, up to 3MB, with a 400 x 400 pixel logo. Design each at its own ratio instead of resizing one file, because the Page cover is much flatter than the profile banner.

Banner built but the profile still gets no enquiries?

Send us the offer and landing page your profile points to, and we will show you where enquiries are likely dropping out after the click.

Request a Free Consultation

LinkedIn Banner Size for Personal Profiles and Company Pages

A LinkedIn banner is the wide image at the top of a profile or Page, and LinkedIn publishes different dimensions for each type, so the correct file depends on where it will sit. LinkedIn's help page for the personal one is titled "background photo" and also uses the term "cover image", which is why searches for the LinkedIn background photo size and the profile banner land on the same specification.

ImageSize (pixels)File type and limitBest for
Personal profile banner (background photo)1584 x 396 (4:1)JPG or PNG, under 8MBFounders, sales leads, consultants
Company Page cover1512 x 256 (about 5.9:1)PNG or JPEG, up to 3MBBrand, offer or campaign line
Company Page logo400 x 400 recommended, 268 x 268 minimumPNG or JPEG, up to 3MBLight and dark backgrounds
Career Page Life tab main image1128 x 376Not stated on the page (Career Pages only)Recruiting
Page post image1200 x 627 (1.91:1)Not stated on the page (feed posts)Link and image posts

These figures come from LinkedIn's image specifications for Pages and Career Pages and the background photo help page, both read in November 2026. Sizes on a platform can change, so open LinkedIn's page before a rebrand rather than trusting any guide, including this one.

Takeaway: two banners, two ratios

A personal profile banner is 1584 x 396 pixels at 4:1, and a Company Page cover is 1512 x 256 pixels at about 5.9:1. They look similar but are cropped to different shapes, so a file made for one will be trimmed or padded on the other.

Which Cover Dimensions Should a Company Page Upload?

A Company Page should upload 1512 x 256 pixels, because that is the figure LinkedIn's own specification page lists as both the minimum and the recommended cover size. A 1128 x 191 figure still circulates on third-party sites, and Lemlist's guide gives 4200 x 700. We could not find either figure on LinkedIn's help page when we fetched it.

We cannot say why the other guides differ; a site that last checked in an earlier year may simply be quoting an earlier size. What you can rely on is the date: LinkedIn's page said 1512 x 256 on 17 November 2026. If yours shows something different when you log in, the platform has moved and the platform wins.

The practical rule is to design at the official size and keep the same ratio. As a working rule of thumb, a file in the official ratio avoids extra distortion, but LinkedIn says covers may still be trimmed, and a larger file must stay inside the file limit (3MB for a Page cover). If you also run a video channel, the YouTube banner size post covers that platform's separate spec, and the Instagram post size post covers feed formats.

Can You Reuse a Profile Banner on a Company Page?

Yes, but reusing a personal banner on a Company Page means trimming about 32% of its height, because the two images have different ratios. Worked through: scale a 1584 x 396 banner down to the Page cover's 1512-pixel width and it becomes 378 pixels tall. The Page cover is only 256 pixels tall, so 122 pixels, about 32% of the height, has to go.

The reverse is no easier. Scale a 1512 x 256 cover up to the 1584-pixel personal width and it is only 268 pixels tall against the 396 the profile needs, a 128-pixel shortfall. LinkedIn will not invent that height for you, so you would be stretching or padding the image.

The crop arithmetic, with inputs

Profile banner 1584 x 396 = 4:1. Page cover 1512 x 256 = about 5.9:1. Profile banner at Page width: 396 x (1512 / 1584) = 378 pixels tall; 378 minus 256 = 122 pixels trimmed, about 32% of the height. Page cover at profile width: 256 x (1584 / 1512) = 268 pixels tall; 396 minus 268 = 128 pixels short.

The cleanest approach is one layout built twice: the same colours, type and brand mark, with the text block rebuilt for each ratio. For a small consultancy where the founder is the public face, the personal banner can carry the message and the Page cover can stay a quiet brand strip.

Where the Crop and the Profile Photo Land on the Banner

The profile photo sits on top of the personal banner, so anything placed behind it is hidden. LinkedIn's help page states that the background photo appears behind your profile photo in the introduction section and that its appearance varies with browser window size, screen resolution and mobile. For a Page, LinkedIn says the cover "might be adjusted to fit the screen, which might trim the image horizontally or vertically".

LinkedIn publishes no pixel safe-zone figures, so any number you read for a safe zone is a practitioner estimate. As a working rule of thumb, keep text and logos away from the left side of the personal banner, where the profile photo sits, and away from the edges of the Page cover, with LinkedIn's own note about the lower-right corner as a starting point. Then check the result on a phone and a desktop before publishing. The two examples below are practitioner heuristics, not LinkedIn rules.

Safer layout for a personal banner: the message towards the right, a plain or textured background on the left behind the photo, and no phone numbers or URLs near any edge.

Riskier layout: small text or a logo pushed into the left corner behind the profile photo, or against the edge of a Page cover, where either overlap or trimming can remove it.

For scale, DataReportal cites figures from LinkedIn's advertising resources showing 17.0 million "members" in South Africa in late 2025, equal to 26.2% of the population. That is an advertising audience figure, not a count of active users, and it grew by 3.00 million (+21.4%) over the year. The report does not say what share of views happen on phones, so test on both desktop and mobile rather than assuming.

Takeaway: design for the clip, not the file

The profile photo covers part of a personal banner and LinkedIn may trim a Page cover to fit the screen, so the pixel size only gets the file accepted. Keep the message away from the profile-photo side and from the edges, then check it on desktop and a phone.

Not sure your company page supports a B2B pitch?

Tell us who you sell to and which offer the page leads to, and we will review whether the offer, landing page and tracking support a B2B pitch.

Request a Free Audit

What a B2B Banner Should Say (and What to Leave Out)

A B2B banner should state one thing a buyer can take in at a glance: who you help, or what you sell. LinkedIn does not publish any data on banner copy and conversion, so the table below is a decision guide built on the layout constraints above, not a tested result.

Your situationBanner should carryLeave outBest for
Founder selling servicesOne line on who you help, placed away from the profile photo (heuristic)Phone numbers, long taglinesPersonal profile
Company with a single offerThe offer name and one proof point you can citeUnsourced claims and rankingsPage cover
RecruitingTeam photo and one culture lineStock imagery with readable textCareer Page Life tab
Running an event or launchDate and event name for the campaign periodAnything that must be changed after the eventEither, swapped on a schedule

If the banner points to a service, the page it leads to has to finish the job. A LinkedIn company page banner size that is correct but carries no clear offer wastes the one wide space you control.

For companies selling to other businesses, the banner is the top of a funnel that runs through LinkedIn marketing in South Africa and ends at a form, so make sure that page matches the line on the image. If you are still creating the Page, how to create a company page on LinkedIn covers the setup before the cover goes on.

Uploading and Checking a New Banner

To upload a LinkedIn banner on a personal profile, use the camera icon in the introduction section to edit the background photo, then check it on desktop and phone. LinkedIn's help page covers the personal steps; for a Page, follow LinkedIn's Page admin help.

  1. Export at the right ratio. 1584 x 396 for a profile, 1512 x 256 for a Page, in JPG or PNG under the file limits above.
  2. Prefer a photo or simple graphic to a logo-heavy image. LinkedIn's help page notes that photos look better than images with logos.
  3. Compress if it looks soft. LinkedIn's help page suggests a compression tool when an image looks blurry despite meeting the specifications.
  4. Check desktop and phone. As a practitioner tip, also view it from a second account that is not a connection, since that is closer to what a prospect sees.
  5. Put the date in your diary. Re-check LinkedIn's image specification page every few months.

Remember that a banner is branding, not a result. A profile with a sharp banner and a vague headline still gives a prospect no reason to reply. Fix the headline and the first screen of the About section before spending time on the visuals.

Sharp banner, quiet inbox?

Book a free audit and we will review the offer, landing page and tracking behind your LinkedIn link, and where prospects drop out.

Request a Free Audit

Why South African Businesses Choose Growth Pulse Media

Growth Pulse Media is a Johannesburg agency founded by Dirk van Greuning, who built and scaled a large South African ecommerce business before founding the agency. All work is executed in-house, and the client load is limited so senior attention stays on every account. Our focus is paid search and paid social, with Google Ads, Meta Ads, GA4 and Search Console behind it, and the commercial side is B2B lead generation in South Africa.

That focus means we do not design LinkedIn banners or run LinkedIn Pages, so use this post as a specification sheet. Where we can help is the part after the image: the offer, the landing page and the tracking that tell you whether a prospect who saw your profile turned into a lead. A free audit or consultation is available through our contact page, with no obligation.

Who This Is NOT For

This post is for people who need the right numbers and a clean layout; it does not suit the three cases below.

You want a banner designed for you. This is a specification and layout guide. Growth Pulse Media does not design LinkedIn banners, so a freelance designer or a template tool is the right route.

You expect the banner to generate leads on its own. No source consulted for this post links banner design to lead volume. The headline, the offer and your outreach do the work; the banner supports them.

You need the Career Page and Life tab in depth. We list the Life tab main image size only. Recruiting layouts, custom modules and employer-brand design are out of scope here.

Frequently Asked Questions

These answers cover the sizes, file limits and cropping questions that come up when you replace a LinkedIn banner.

What is the best LinkedIn banner size?

The best LinkedIn banner size is the one LinkedIn recommends for the type of account: 1584 x 396 pixels for a personal profile and 1512 x 256 pixels for a Company Page cover. A profile banner can be a JPG or PNG under 8MB, and a Page cover a PNG or JPEG up to 3MB.

What is the LinkedIn cover photo size for a company page?

The LinkedIn cover photo size for a company page is 1512 x 256 pixels, listed by LinkedIn as both the minimum and the recommended size. Some guides quote 1128 x 191 or 4200 x 700, but LinkedIn's help page lists 1512 x 256. Check that page when you upload, because platform specs can change.

Is the LinkedIn banner the same as the background photo?

Yes. LinkedIn's help page for the wide image on a personal profile is titled "background photo" and also uses the term "cover image", and most people call it the banner. The recommended size is 1584 x 396 pixels, and the image sits behind your profile photo in the introduction section.

Why does my LinkedIn banner look blurry or cropped?

LinkedIn says a banner's appearance varies with browser window size, screen resolution and mobile, and that a Page cover may be trimmed to fit the screen. For a blurry image that already meets the specifications, LinkedIn's help page suggests a compression tool. Keep key content away from the edges.

Can I use the same banner on my profile and my company page?

You can, but one will be cropped or padded, because the shapes differ. Moving a 1584 x 396 profile banner to a 1512 x 256 cover trims about 32% of the height. Build one layout twice at each ratio instead of resizing a single file.

Want Your LinkedIn Presence Turned into Pipeline?

Growth Pulse Media is a Johannesburg agency working in Google Ads, Meta Ads, GA4 and Search Console, with all work executed in-house. Send us your profile and offer for a free audit or consultation. No obligation — we’ll get back to you within 24 hours.

Get Your Free Consultation
Dirk van Greuning — Founder, Growth Pulse Media
Dirk van Greuning Founder, Growth Pulse Media

Founder of Growth Pulse Media and a specialist in South African search dominance. Dirk translates his experience in scaling South African businesses into high-velocity digital strategies for B2B and retail leaders. He writes about SEO, lead generation, and paid media from an operator's perspective — prioritising pipeline value over impressions.

Connect on LinkedIn